|
|
Insulators |
|
|
 |
3-Way Tee Tensioner by Powerfields
Has 3 tensioners for use at all cross fence junctions to divide lots or fields. |
 |
Corner Donut Insulator by Zareba Systems
Unbreakable polycarbonate has 5,000 lb. tensile strength versus 700 lb. for porcelain. The insulator is the same size as a porcelain insulator, but will not chip or crack. |
 |
Corner Heavy Duty Insulator by Zareba Systems
Designed for quick and easy installation. For use with heavy gauge wire and barbed wire. |
 |
Corner Standard Insulator by Zareba Systems
For use with lightweight smooth wire or polywire. Fastener snaps open and shut for easier wire installation. |
 |
EZ On Vinyl Clip
Ever get frustrated that your expensive vinyl fence gets damaged when your horse or other livestock rub up against it? Have you tried protecting your investment by running a hotwire along the inside of it, only to find out that there really isn’t anything out ... |
 |
Pin-Lock T-Post Insulators by Powerfields
Use on T-posts for holding Hot Rope, polywire or wire. |
 |
Rod Post Insulator by Tru-Test
Adjusts to fit rod posts from 1/4" to 5/8". Heavy duty screw-on nut with non-slip grip ensures a tight hold on post. Holds wire, poly wire, poly tape or poly rope up to 1/4". Black.
|
 |
Snap'r Cap'r Safety Insulator by Zareba Systems
For use with polytape, polywire, polyrope or traditional wire. Provides maximum protection from sharp jagged T-posts or wood posts. |
 |
Splitball Insulator Power Driver by Premier Sheep Supplies |
 |
Stand-off Insulator w/ Pin Lock by Speedrite
Stand off bracket keeps electric fence approximately 7" away from the existing fence. Intertwine legs of bracket into existing mesh, woven, or barbed wire. Pin Lock holds the wire firmly in place. |
 |
T-Post Cap by Powerfields
The perfect cap for top of T-post when vinyl sleeve is not used, to prevent injury to horses. Accepts tape and wire on same side. |
 |
T-Post Claw Insulator by Powerfields
A high strength T-post insulator for fences that could suffer greater abuse. Made for stronger materials like twisted or braided rope, Poly Coats and High Tensile wire up to 3/8" diameter. The claw design allows the material to slide upon impact.
|
 |
T-Post Extender Insulator by Zareba Systems
Extends electric fence wire 5” away from post to protect permanent or damaged fences. Features an unbreakable snap-on/snap-off fastening system, which accommodates standard sized T-Posts from 1 1/4” to 1 3/8”. |
 |
T-Post Extender Insulator - Poly Tape by Zareba Systems
Extends poly tape (up to 1 1/2” wide) 5” away from post to protect permanent or damaged fences. Features an unbreakable snap-on/snap-off fastening system, which accommodates standard sized T-posts from 1 1/4” to 1 3/8”. |
 |
T-Post Insulator by Zareba Systems
Designed for low impedance and standard duty fence controllers. Fits T-Post sizes 1 1/4" to 1 3/8". Wrap around design attaches easily and holds securely. Arcing protection. Easy 45° front end loading feature accommodates most wire sizes and types. U.V. protec... |
 |
T-Post Insulator by Powerfields
For use on steel posts without vinyl sleeves. |
 |
T-Post Pin-Lock Insulator by Zareba Systems
Fits T-posts from 1 1/4" to 1 3/8". When pin is secured, wire is locked into place and can't slip off insulator. |
 |
T-Post Poly Tape Insulator by Zareba Systems
Fits T-posts from 1 1/4” to 1 3/8”. Accommodates polytape up to 1 1/2” wide. |
 |
TuffRing Insulator Power Driver by Premier Sheep Supplies
Slips over XL TuffRing Insulator for use with a cordless drill. Speeds installation time and labor. |
 |
Universal Insulator by Powerfields
Polyethylene insulators for use on vinyl sleeves or wood posts. Locks tight to tape to prevent slipping. Screws not included. |
 |
Universal Insulator Extra Screws by Powerfields |
 |
Wood or T-Post Pin-Lock Insulator by Tru-Test
Made of high-density polyethylene, these insulators snap onto steel posts or can be nailed to wood posts. Unique design allows wire to be placed onto insulator after insulators are installed simply by placing retaining pin through hole. |
 |
Wood Post Claw Insulator by Powerfields
A high strength wood post insulator for fences that could suffer greater abuse. Made for stronger materials like twisted or braided rope, Poly Coats and High Tensile wire up to 3/8" diameter. The claw design allows the material to slide upon impact.
|
 |
Wood Post Extender Insulator by Zareba Systems
Extends electric fence wire 5” away from wood posts to protect permanent or damaged fences. Nails included. |
 |
Wood Post Extender Insulator - Poly Tape by Zareba Systems
Extends poly tape (up to 1 1/2” wide) 5” away from wood posts to protect permanent or damaged fences. Nails included. |
 |
Wood Post Insulator by Zareba Systems
Holds poly wire rope up to 1/2" diameter or up to 2" wide poly tape. Keeps tape flat, nails included. |
 |
Wood Post Insulator by Zareba Systems
Use on wood posts. Has slotted back for easy removal. |
 |
Wood Post Pin-Lock Insulator by Zareba Systems
Pin lock insulator with nails for wood posts. |
 |
Wood Post Pin-Lock Insulator by Powerfields
Use on wood or vinyl posts for Hot Rope, polywire or wire. |
 |
Wood Post Rope Insulator by Parker Mccrory
A durable screw-in insulator for wood posts. For use with the 1/4” electric rope. UV resistant. |
 |
Wood Post Splitball Insulator by Premier Sheep Supplies
A durable screw-in insulator recommended for rope fences. Rounded edges prevent damage to the rope. Easy wire entry into insulator, but the rope will not come out. Extends the rope 2" away from the post. Smooth design, safe for horses. Black or white. Power Dr... |
 |
Wood Post XL TuffRing Insulator by Premier Sheep Supplies
An ideal insulator for corner or end posts. Has a metal shank that extends around the curve of the ring for added strength. Works good for posts with an upward or downward pull. |
 |
Wrap Around Insulator by Tru-Test
Flexible 24" long insulators allow maximum line flow around corner posts or trees. |
Overview Display | Insulators Browse Display
