Posts

Portable, strong fence post. UV-resistant. Over-molded nylon foot will not bend and deform when pressing into the ground.

The perfect insulating post for electric fencing. Highly visible, won't rust and weigh much less than wood or steel posts. Smoother "China" finish reduces slivers.

Steel Pig Tail Step-In Post made from super heavy duty galvanized steel rod. Designed for use with all wire, polywire, polytape and rope electric fences. 30,000 volt, UV resistant insulation ensures fence won't short out. Sharpened post end allows for easy insertion into hard ground. Extended step-in fin provides additional ground stability. Reinforced crimped foot step for increased strength. 42" length.

Quickly set up fencing in any outdoor area with Zareba White 4’ long Step-In Fence Posts. Each post features a step-in flange with anti-rotation spike to secure it in the ground as well as 8 clips that are big enough to hold 2” poly tape. To install, just set up your fence perimeter with the step-in posts and then run your fence line between them. Zareba designed these posts with electric fencing in mind, but they can also be used for setting up perimeters for crowd control, construction zones, and property marking. The step-in posts can also hold decorations or serve as a vegetable or plant stakes. Each post is constructed with durable polypropylene and steel; Zareba built these fence posts to last while being easy to install and remove. The built-in clips are set at the following heights (measured from the top of the step-in flange): 5.00”, 9.50”, 12.50”, 17.45”, 21.45”, 26.75”, 30.10”, 35.25” (highest fence height)

Insulated Line Posts are lightweight, composite posts featuring a strong yet flexible solid fiberglass core in a UV-protected polyethylene cover. Pre-formed wire attachment locations enable many different fence configurations. Wires simply snap onto the post with the Insulated Line Post Clip Insulators, sold separately. The multi-flanged foot design ensures strong ground anchoring, reducing the likelihood of post heave or post misalignment over time. 47" post is 63" overall. 55.5" post is 75" overall.

This heavy duty, multi wire ring top post is 34.5" tall. The preformed notches allow multiple customized wire heights, and the ring top head enables single wire use. Gallagher's one-of-a-kind, ring top post is built tough with a head that will not wear through, a super strong foot plate that will not bend under pressure, and a sleek design that significantly reduces tangling.

Gallagher's one-of-a-kind, ring top post is built tough with a head that will not wear through, a super strong foot plate that will not bend under pressure, and a sleek design that significantly reduces tangling. The Ring Top Post combines more strength with less frustration. 33.5" high.

Designed specifically to drive the Gallagher Insulated Line Posts into the ground. 36" long x 2" diameter.

To be used in conjunction with the Gallagher Insulated Line Post Driver to prevent flex when driving Gallagher Insulated Line Posts into hard ground. 45" long x 1 7/16" diameter.