Hay & Grain Feeders

Heavy duty poly feeders with durable spring link clips that fasten easily to wire fence. Can't be knocked off or turned over. Great for use at home or shows.

These metal hay baskets make for easy feeding of hay. Great for shows or small pens. Stackable and lightweight for easy hauling and storage. Front panel meaures 19" tall x 16" wide and back panel is 20" tall x 18" wide with a 12 1/4" deep opening.

Powder coated steel feeder that conveniently holds both hay and grain. This combination feeder is great for kidding season or the show circuit. Sturdy clips on back allow for easy hanging on panels. 21" tall x 21" wide x 14" deep.

This hanging hay goat feeder has side brackets that allow hanging on panels or attachment to walls. 4x4 paneling on front and sides to allow hay to be pulled through with minimal wasting. Lightweight and easy to handle.

This sturdy steel hay feeder has 4 x 4 paneling at sides and ends of feeder to allow easy hay feeding with minimal waste. Easily holds one square bale. Available with pan to catch any loose hay. Pan is angled on sides to help eliminate standing in pan. 4' tall x 28" wide x 4' long x 30" deep.

The Classic 2-in-1 Feeder is designed for goats, sheep, and calves. Hangs easily on fence rail, chain-link, or hurricane fencing. Unique hook-over design for convenient mounting, permanently or temporarily at shows. Combination 2-in-1 feeder holds grain and two flakes of hay. Galvanized steel. 21.5"L x 13 "W x 23"H.

A sturdy polyethylene feeder made to dispense minerals to your goats and sheep automatically with no waste or danger of contamination. This non-corrosive, rustproof feeder is designed to protect the minerals from the elements and keep it clean. Has an adjustable height and flow control. It fills from the top and has an attached lid. Holds up to 25 lbs.

Low, wide pan, only 4 1/4" deep. Ideal for foals, yearlings, sheep, etc.

A neat and convenient way to feed your sheep or goats in a nursery or at shows. Feeding holes measure 4" diameter. Clevis kit mounting hardware is included.

Ideal for goats, sheep, and miniature horses. Its dual-purpose molded bracket functions as both a hanging bracket and a carrying handle. The bracket fits easily over any 2” wide board to create a sturdy feed pail in the stall, on a fence or anywhere else, plus its smaller size and finger grip bottom make it perfect for scooping and pouring. For more permanent mountings, simply place two screws in the holes provided on the handle.

Large capacity 22 quart feed pan is ideal for holding large volume, high fiber feed rations. The large, open handle design provides a comfortable. Large diameter bottom prevents tipping and spills. 22 quart feed pan is constructed of tough impact resistant polyethylene.

Heavy-duty 8' bunk feeder has a galvanized pan adjustable from 11 1/2" to 17 1/2" high and an adjustable top bar. The V- trough design keeps kids/lambs from standing in feeder. Has a sturdy steel base. Best for dispensing grain.

This Little Giant fence feeder is ideal for field, pasture, trailer or stall. The durable molded bracket hooks over any 2” wide board to instantly deliver a sturdy feed bucket. For a more permanent installation, simply set two screws in the holes provided. The molded bracket also has a built in handle for easy maneuvering. Made of polyethylene.

Has 7" spacings between the vertical uprights with 1/2" shafts that support the tub. The tub height is 16" above the ground. Easy to clean and designed to reduce feed loss. Unit comes in 3 steel sections that pin together.

Ideal for foals and other small animals. Built-in bracket hooks over any 2-by-wide board for portable use in barn, stall, pasture, or pen. Two eyelets provided for permanent mounting with screws (not included) if desired. Made of tough, DuraFlex plastic. Measures 9.75 inch long by 11 inch wide by 5.5 inch high, holds 6 quarts (1.5 gallons).

This sturdy steel hay feeder has 4 x 4 paneling at sides and ends of feeder to allow easy hay feeding with minimal waste. Easily holds one square bale. 4' tall x 28" wide x 4' long.

The Hook Over 9 Quart Goat Trough is ideal for goats, sheep, llamas, and alpacas. When feeding multiple animals together, the narrow design and metal grid help minimize pushing and fighting. Made of tough, impact-resistant polyethylene. 9-Quart Hook Over Trough mounts on any 2" wide board or on wire livestock panels. 37.75"L x 8.44"W x 4.72"H.

Molded rubber pan is the perfect size for smaller feedings, taking to shows, etc.

Two compartment feeder, ideal for minerals, vitamins, supplements, feed or liquid. Pre-drilled holes at top and bottom allow for secure mounting.

The 24" Hook Over Feeder is made from tough polyethylene and has 16 quart capacity. Built-in divider allows for simultaneous feeding or separating of pellets, feed and supplements. Heavy duty steel brackets allow the feeder to hang on wire, pipe and board fences. Brackets adjust from 1/4" to 2 1/4".

Great for lamb or kidding pens or at shows. Works nice for a small number of animals. Bracket on the back will mount on 1 1/2" material. Constructed of 1/4" rods with 3" spacings.

Same design as the smaller hay basket but is 4' long. Constructed of 1/4" and 1/2" rods. Mount just high enough for animals to reach.

Heavy-duty polypropylene feed scoop.