Wire Fence Equipment

Easily stretch mesh fencing. Stretcher consists of two sides that detach and face each other on either side of fence. Bolt stretcher together to grip fence. Chain is attached to stretcher and used in conjunction with come along to pull fence tight to eliminate fence bulge. Professional looking results. Chains/come alongs are not included.

Repairing fences can be time consuming and costly. Not anymore! In less than a minute you can tighten your loose fence quickly and inexpensively without cutting the wire. Tightens any type wire up to 12 1/2 gauge without un-stapling and re-stretching. Simply insert the clip and with a couple of turns with tightening handle, your job is done. Will not kink the wire. Can be re-tightened as wire stretches.

Protect your valuable horses and livestock from serious injury and unsightly scrapes. Safe-T post caps are designed to conform to a wide range of steel post sizes and stay on tight, eliminating the hazards of sharp, jagged post tops.

Use with Jakes Wire Tighteners for tensioning wire.

The standard for both electric and non-electric fences. Class 3 galvanized, 180 KSI wire. Ideal for all perimeter fences. Can be hand-knotted or crimped.

Can save you 75% to 90% of your fence maintenance labor. Mend new and old fence wire in a fraction of the normal time. Tighten any kind of wire without unstapling and restretching. A Reel-Tite is a metal disk measuring 4" x 2 3/4" and made of sturdy 14-gauge steel with plated, weather-resistant finish. 4" x 2 3/4". Reel-Tites do not break your wire. Use on any kind of wire: New or old, barbed wire, smooth wire, hi-tensile, woven wire, etc. Just attach Reel-Tite handle and turn clockwise until wire reaches desired tension. An out-turned flange holds securely in place. can be maintained year after year by re-tightening as needed.

Quick and simple way to splice wire - barbed, woven, smooth or high tensile. Simply place wire inside splice and crimp using the Crimp 'N Cut Spice-It Tool. Splices stay tight even with temperature changes. Holds tight using only one splice per joint. Package of 100. Crimp 'N Cut Spice-It Tool sold separately.

Professional quality 22" Splice-It tool has adjustable case hardened steel jaws and sure-grip handles.

Speed Brace Fence Brace quickly and easily makes both “H” braces or diagonal braces for permanent or temporary fence. Can be used anywhere you can drive a T-post. Easily slips over T-post, no tools required. Build corner or end braces for all types of livestock fence. Holds up to 5 wires or up to 48" woven wire. Contents: * 4 connectors * 8 bolts/wing nuts * 4 wire thimbles Contents of this package will build 4 light duty end braces, or 2 light duty corner braces, or, 2 heavy duty end braces or 1 heavy duty corner brace.

This fence stretcher, made of tempered steel, is the last stretcher you'll need to buy. Simple design means no breakdown problems yet effectively tighten wire by putting pressure against the post. Stretcher grabs the wire and you hold pressure with your side, leg, etc, leaving your hands free to staple wire to post. No cumbersome releases to free wire when finished.

Removes steel T-Post without the aid of chains, jacks or motorized assistance. No back-breaking wiggling or pulling. Use in remote areas. The simple design is built to last.

Model 415 has a new-patented 3rd hook design, which allows for longer pulls without re-setting stretcher. Allows for one-man fence building.

Insert barbwire, smooth wire, or small cable into slot of self-locking collar and stretch with a come-along or fence stretcher. Will not damage wire.

Turn clockwise until wire reaches desired tension.

Forged fence tool is heavy duty, with vinyl grip. Suitable for many jobs, including stretching and twisting wires, as a hammer, nail puller, spade, and as a wire cutting plier.