Stalls

18" Outdoor or Indoor Waterproof Non-Oscillating Fan from J&D Manufacturing is a premium waterproof indoor/outdoor fan, ideal for livestock and other applications where the fan may come in contact with rain and humidity. Pre-wired with a 115 volt plug and 8' cord for instant operation. With mounting bracket for wall or ceiling. 3-speed pull chain. UL507 fans can be sprayed down to remove dust and dirt build-up.

Blade design blows at a higher velocity and wider path of air movement to provide more air flow. Specially designed guard is built to last. Shape of guard is designed to beter protect the blade from damage. Guard does not taper at outer edges where fan blades are often damaged. Guard complies with OSHA regulations. Equipped with a heavy duty 1/2 horsepower ball bearing motor that is perfectly engineered to the blade and guard so that it can deliver the maximum performance possible. Super efficient - only draws 4 amps of electricity. Appr. 10,000 CFM. Stand not included.

Made in the USA with dependable, long-lasting components. Livestock Fan is designed to provide your animal maximum comfort and hair growth. This high velocity 24" fan is designed to withstand show travel and comes with dependable, long-lasting motor and guards for durability. Corrosion resistant inside and out for durability and long life. Powerful motor with unique low solidity ratio blade for best-in-class efficiency and quiet operation without sacrificing airflow and speed. Hang mount included for easy setup and takedown. 1/2 horsepower. 7700 CFM.

Indoor/Outdoor Shutter Fan from J&D Manufacturing provides exhaust to help remove heat, condensation and noise from barns and livestock buildings. Corrosion resistant aluminum shutter with tie bar to reduce shutter flapping and opening on windy days. Easy to install for great performance and smooth, quiet operation. Pre-wired with built-in 9' cord and switch for 115 volt power.

Bye Bye Odor® Concentrate is a safe and highly concentrated microbial solution that is capable of reducing or eliminating a wide range of organic odors associated with animal waste and urine. The microbes, when wet, consume or break down the urea and other organics that cause the unpleasant smell and unhealthy ammonia build up. Doesn't just mask the odor, but eliminates it. Appropriate for large and small animal odors, indoors or outdoors. Mix 1/2 oz. concentrate with 32 oz. water. Spray liberally on and around odor area.

The well-built stall/alley guard has a 70” L x 24” W plastic center and four nylon adjustable straps at each end that at full length measure 36”. It will adjust up to 10’. Great product for making your own portable stall.

Perfect for securing the aisle for grooming or farrier work. Made of durable Textilene mesh and bordered on all 4 sides with 3” nylon webbing. A generous 21” inches wide, the guard is adjustable to fit openings from 135” to 139” wide using the adjustment straps. Beautiful brass-plated hardware completes the look and includes heavy-duty D rings for easy fastening and double ended snaps and screw eye for attaching to the aisle. (Includes all hardware.)

Odaway Concentrate is a concentrated liquid odor absorber that eliminates a broad spectrum of barn-borne odors. Odors are encapsulated and neutralized instead of being masked. Especially effective when used in an automatic misting system like the Pyranha Spraymaster. May be mixed with Pyranha insecticide concentrate or used alone. One gallon makes 55 gallons spray. For use in a hand sprayer, use 2 oz Odoway per quart bottle. Fresh, clean scent.

Perfect for securing the aisle for grooming or farrier work. Made of durable Textilene mesh and bordered on all 4 sides with 3” nylon webbing. A generous 21” inches high, the guard is adjustable to fit openings from 135” to 139” wide using the adjustment straps. Includes heavy-duty D rings for easy fastening, and double-ended snaps and screw eyes for attaching to the aisle. (Includes all hardware.)

Keep your horse safely in the stall. Made of durable Textilene mesh and bordered on all four sides with 3” nylon webbing. A generous 34 1/2” long by 36” wide, this guard fits openings up to 47” wide using the adjustment straps. Includes 3 heavy-duty D rings on each side for easy fastening, and double-ended snaps and screw eyes for attaching to the barn door. (Includes all hardware.)

This fan is built to last with a fully enclosed 1/10 HP motor with the same quality as Sullivan’s TURBO Fan. Comes with a heavy duty cord with switch. This fan is built for the high demand of the show road and is great for show trailers. Perfect for small animals with a quiet, yet high air flow volume.

Whether it’s insect bites, boredom or shedding a winter coat, your horse will seek relief from his itch wherever he can get it. The result can be broken skin or puncture wounds. If you’ve seen your horse trying to relieve an itch, then its time to install The Equine Scratcher. The Equine Scratcher is designed to give maximum itch relief without the worry of potential injuries. Simply install on any vertical surface and watch your horse love the feeling he gets from rubbing either up and down or back and forth. Has a no-pull surface that will not tear at your horse’s mane and tail, leaving those short, broken hairs that never seem to grow back. Flexible enough to wrap around 8” or greater diameter curved surface.

Black coated metal holder with rubber stoppers will fit securely over stall walls or rails to hold a box fan in position. 16 1/2" wide x 15" high x 5 5/8" deep. Fan must be bigger than 16" x 16".

Country Vet Metered Air Fresheners are designed for use in Country Vet Metered Dispensers. Country Vet Metered Air Fresheners are uniquely blended pure premium fragrances with odor counteractants that eliminate odors and leave the air fresh.

Mount your fan to a wall, post or ceiling. Adjustable pivot allows you to set fan's direction.

A great organizer designed to accommodate both you and your horse. Durable 1000 denier nylon with both open and zipper mesh pockets to keep things organized. Also includes insulated cup holders to keep your beverages cold while grooming. Attaches easily to trailer door or stall wall. Mounting brackets are included, hook and loop bands loop thru the mounting brackets to mount. Screws are not included with mounting brackets.

This mini salt block holder conveniently mounts on fences or stall walls. Keeps blocks off the ground. Will not rust, corrode or break. Guaranteed for 3 years.

The Indoor/Outdoor Oscillating Wall Mount POW fan from J&D Manufacturing is a 3-speed waterproof fan with quiet operation. Ideal for livestock and other applications where fan may come in contact with rain and humidity. Pre-wired with a 115 volt plug and 10' cord for instant operation. With wall mounting bracket. 3-speed pull chain. UL507 fan can be sprayed down to remove dust and dirt build-up.

Made of full weight extra strong 2" width nylon. Adjusts from 36" to 40".

Heavy-duty ¾" solid rubber stall ties with brass bolt snaps at each end.

The same use as the Original Equine Scratcher, but now more pliable to bend around the corner to suit your horse’s exact need of scratching area. Three panels per package, each panel is 10.5" x 9.5". Comes with 24 screws and washers.

This handy fan stand moves easily and has an adjustable height from 3'5" to 4'. Supports one fan.

Always have your necessary spray supplies right where you need them. Hangs neatly on stalls and fences. Fits standard fly spray bottles. Made of steel and powder coated. Portable. Made in the USA.

Keeps salt clean and salt lasts longer. Holds 50-lb. salt blocks. Fits on pipe corrals, wood fences, wire fences (over post). Heavy duty with baked on enamel that lasts for years.

New design holder holds block so they stay drier and last longer. Specially designed so rain water drains away. Block does not lay flat like old style holders. Drain hole in bottom. Holds 2 standard size blocks. 18" wide x 32 1/2" long.

Durable, black steel misting ring will turn your fan into a cool, comfortable oasis during the summer heat. The Arctic Chill uses a unique nozzle that creates a micro fine mist which flash evaporates, cooling the air up to 30 degrees. Three nozzles are placed on a 16” diameter, durable, black powder-coated steel circle that has a 6’ line that connects to a garden hose. Attaches to any 24” fan.

An effective way to help control stall odor problems and extend bedding life. Evenly spread 1 lb. on any type bedding every 10 days to the average size stall. 10 lbs. should last approximately 3 months.

This MaxxAir 20", high velocity, 3-speed floor fan is perfect for keeping cool indoors or in the garage or basement. This fan has individually balanced fan blades for minimum vibration and quieter operation, as well as a powder-coated finish for ease in cleaning. 1-year limited warranty.

Heavy-duty 1" nylon webbing creates a functional hanger for most 20" box fans. Quick release buckles for easy on and off, plus slides for precise size adjustments. Includes a separate tilt strap that allows you to angle the fan downward, if desired.

Keep your grooming essentials neat and organized in this trailer grooming bag. Open and zippered mesh pockets and padded compartments are perfect for storing brushes, combs, bottles, cans, and more. Hook-and-loop closure for easy hanging. 23” W x 39”H.

Durably constructed from 2" square powder coated steel tubing, the bracket holds up to two fans (sold separately) and easily mounts to wall or stall front, eliminating the need for a heavy base. Two slotted fan cage brackets attach fans to arm and allow the fan angle to be adjusted for desired air direction. Two mounting brackets included for easy installation.

Secures standard 20” x 20” box fan to stall. Sturdy nylon webbing resists horseplay. Lightweight and portable.

Rugged and durable stall/trailer guard with approx. 1" diameter strong rubber coated center with chains exposed on each end. Total length of stall/trailer guard is 42 1/2".

The new deep cage design allows for less friction between blades and cage resulting in a quieter running fan with the looks of the turbo fan. Has a heavy duty 1/2 hp. motor with a 24" blade. Front hinged cage provides easy access to clean grime from blades.

Rugged 2" webbing stitched together. Adjusts from 36" to 44". Nickel plated snaps.

Add a touch of elegance to your stall door opening and keep your horse safely in the stall. Made of durable Textilene mesh and bordered on all four sides with 3” nylon webbing. A generous 34 1/2” long by 36” wide, this guard fits openings up to 47” wide using the adjustment straps. Beautiful coordinating hardware completes the look and includes 6 sets (3 on each side) of heavy-duty D rings for easy fastening and double-ended snaps and screw eyes for attaching to the barn door. (Includes all hardware)

Add a touch of elegance to your stall door openings and keep your horse safely in the stall. Made of durable Textilene mesh and bordered on all 4 sides with 3” nylon webbing. A generous 34 1/2” inches long by 21” inches wide, the guard is adjustable to fit openings up to 47” wide using the adjustment straps. Beautiful brass-plated hardware completes the look and includes heavy-duty D rings for easy fastening and double ended snaps and screw eye for attaching to the barn door. (Includes all hardware.)

Hangs from a 2’ x 4’ rafter.

Made of the highest quality, most durable plastic on the market. The scoop has a comfortable, rubberized handle for an anti-slip grip. Equipped with a first-of-its-kind thumb groove, to allow you to get the best grip without discomfort. Clear plastic body with measure lines at one quart and two quart. Allows you to easily and more accurately measure out feed, resulting in consistency in your feed program. Tip: Dry eraser markers work well on this scoop for additional information and measurements.

Handle is over 2 quart scoop for balance. Bottom opening is 6" across and tapers up to 4" across. 6 1/2" tall. Durable high impact plastic.

This white stall card with black lettering features an erasable surface, to be used over and over. Sold complete with black marker and pen holder with an adhesive peel back for ease of installation. Card measures 11 1/2" wide by 7 3/4" in height. Great for putting names and/or phone numbers on stalls, special instructions or show information.

Disinfects and sanitizes stalls, trailers, tack and equipment by eliminating harmful germs, viruses and bacteria.

Keep your tack room or trailer tidy and organized. Comes in three sizes. The large size is made of marine-grade canvas. Small and mini, made for trailer doors with windows or smaller spaces, made of heavy nylon. Green mesh pockets for storing your products. Includes mounting hardware.

* Multi-use, durable trailer organizer for sprays, medicine, boots, wraps, etc. * Removable center dividers and external buckles * Folds up entirely when empty and can collapse in half to save space * 22 1/2” x 9 1/2” x 13 1/2”

Great way to identify your horse at the barn. 2" x 8". White lettering.

The 24" Portable Drum Fan from J&D Manufacturing offers high output performance and efficiency. Provides high velocity air circulation and cooling for heat relief, insect control, surface drying, machine cooling and consistent air temperature. Pre-wired with 6' 6" grounded 3-prong plug for 115 volt power. 2-speed rotary switch. Large, lightweight wheels and handles for easy transportation.

The MaxxAir 42" 2-Speed Portable Belt Drive Barrel Fan is a big air mover. This fan is ideal for moving large volumes of hot air quickly and efficiently to keep people, animals, and machines cooled off. This MaxxAir fan is useful indoors, on the factory floor, in a warehouse, or in a barn with livestock where high-velocity air movement is needed. This fan is belt-driven for quieter operation and longevity, and has a rugged, 22-gauge steel powder-coated housing for durability. The grille is OSHA compliant, rust-resistant, and powder-coated. Shipped completely assembled, to operate simply plug into a standard outlet. 2-year limited warranty.

The 24" MaxxAir tilt fan is perfect for all of your small and medium sized ventilation needs. It can be used in small workshops, on patios, in garages, and in warehouse stations. This fan is also useful for drying carpet when tilted 180 degrees. Has non-skid positioning legs, roll-around wheels for mobility, and a rugged 22-gauge steel housing for durability, as well as OSHA compliant, powder-coated grilles. Shipped completely assembled, to operate simply plug into a standard outlet. 2-year limited warranty.

Great way to identify your horse at the barn. 2" x 8".

Great way to identify your horse at the barn. 2" x 8" with white lettering

Beautiful scrolled name plate adds a little something extra to your custom items. 3/4" x 4". Satin Brass.

HAF 3-Speed Stir Fan with Wide Guard provides gentle air movement throughout your building. Helps circulate air year round and moves hot air back to floor level during the winter. Pre-wired for 115 volt power. Versatile mounting bracket allows for easy tilt and swivel of fan to easily change direction and angle of air movement.

This MaxxAir 2-blade 18" wall mount fan is a great choice for barns, workshops, or garages, pushing up to 3,500 CFM on High. This fan features a totally enclosed motor, which prevents dust and other particles from clogging and damaging critical components, ensuring longer life in the field and worry-free operation. Install your fan on a wall or ceiling to save your floor space with the included U-bracket, then tilt and set it to your desired angle. Control your speed settings using a smart device and a local WiFi connection. Simply plug into a standard 120V outlet and configure your settings on the WiFan App. Constructed of powder-coated steel and ships completely assembled. 1-year limited warranty.

Save on operating costs with DC motors that are up to 65% more energy efficient than traditional AC fan motors. The Big Air 72" ceiling fan is a modern aluminum industrial ceiling fan with a unique look that is functional for areas such as shops and barns, and sophisticated enough to work in an office space or living area. The large diameter blades deliver a cooling circulation and can be used in both summer and winter to help cool any area more efficiently. For indoor use only. 1-year limited warranty.

Save on operating costs with DC motors that are up to 65% more energy efficient than traditional AC fan motors. The Big Air 96" ceiling fan is a modern aluminum industrial ceiling fan with a unique look that is functional for areas such as shops and barns, and sophisticated enough to work in an office space or living area. The large diameter blades deliver a cooling circulation and can be used in both summer and winter to help cool any area more efficiently. For indoor use only. 1-year limited warranty.

Portable Cooling Unit combines high velocity air and cooling mist to give the feeling of up to a 30°F temperature drop. Tubular aluminum frame with 22 gallon reservoir tank, 60 PSI pump and 18" 3-speed fan. Handles and rugged 8" tires allow for easy transport. Reservoir tank provides cooling mist for 5-8 hours between fills. Unit folds down easily for transport and storage. Fully assembled, just add water and plug it in.

Portable Cooling Unit combines high velocity air and cooling mist to give the feeling of up to a 30°F temperature drop. Tubular aluminum frame with 22 gallon reservoir tank, 60 PSI pump and 24" 3-speed oscillating fan. Handles and rugged 8" tires allow for easy transport. Reservoir tank provides cooling mist for 5-8 hours between fills. Unit folds down easily for transport and storage. Fully assembled, just add water and plug it in.

Portable Cooling Unit combines high velocity air and cooling mist to give the feeling of up to a 30°F temperature drop. Tubular aluminum frame with 22 gallon reservoir tank, 60 PSI pump and 24" single-speed fan. Handles and rugged 8" tires allow for easy transport. Reservoir tank provides cooling mist for 5-8 hours between fills. Unit folds down easily for transport and storage. Fully assembled, just add water and plug it in.

Portable Cooling Unit combines high velocity air and cooling mist to give the feeling of up to a 30°F temperature drop. Tubular aluminum frame with 22 gallon reservoir tank, 60 PSI pump and 30" 3-speed oscillating fan. Handles and rugged 8" tires allow for easy transport. Reservoir tank provides cooling mist for 5-8 hours between fills. Unit folds down easily for transport and storage. Fully assembled, just add water and plug it in.

Perfect for stalls or round pens. The Powder Creek Combo Bow Gate is a gate and a panel built into a 12' panel size. There is a 6' wide gate and 6' of panel. The gate frame is 8' high and made from 13-gauge tube steel. Features a chain latch and pin and clip connectors to allow it to easily pin up to any other Powder Creek or Powder River product. Durable hunter green powder coat finish. (It is not recommended to use the Powder Creek gates in any high pressure cattle working environment.) Weighs 108 lbs.

The Powder Creek Bow Gate is a nice addition to any area of panels needing a pass through gate where you don’t want to set posts and install a permanent gate. 6' wide x 9' high and built with a 13-gauge bow frame. The gate is built out of 18-gauge uprights and (6) 1 5/8" 20-gauge horizontal tubes. Has pin and clip connectors so it can be pinned into place on any of the Powder Creek or Powder River panels. Utilizes a chain latching system. Hunter green powder coated paint finish. This gate is not recommended for use in any high pressure cattle working zone.

Powder River offers Powder Creek, one of the best all-purpose panel lines in the market today. Available in 10’, 12’, and 16’ lengths. These panels are ideal for perimeter fencing, round pens, etc. The 16-gauge vertical stays give additional support and strength to the tubular rails. The 64” height, along with the popular pin and clip connections, match up to our other Powder Creek panels. (Powder Creek panels are not designed for holding cattle.)

Versatile cardholder features a removable plastic envelope and card. Ideal for noting feed rations, identification and other daily care information.

3-stage carbon phosphate filter suspends particles that could clog nozzles. a must for all misting systems. Attaches in line to all garden hose connections.

Beautiful 9" x 3" wood stall sign with brass engraved plate. Comes with a chain so it is ready to hang. Cherry wood.