Repairing fences can be time consuming and costly. Not anymore! In less than a minute you can tighten your loose fence quickly and inexpensively without cutting the wire. Tightens any type wire up to 12 1/2 gauge without un-stapling and re-stretching. Simply insert the clip and with a couple of turns with tightening handle, your job is done. Will not kink the wire. Can be re-tightened as wire stretches.
There is no faster, more permanent way to take the slack out of your fence line. Works with barbed wire, electric fence wire, horse fencing, or net wire fence. The unique tool is simple in design and easy to use. Durable and comes with a lifetime warranty. Use anywhere along the fence line that needs stretched and the result is a neat, tight wire. No need to remove staples or tie wires. The tool has two “hinges” that are indented; you place the fence to be tightened into those slots, grab another slice of wire tightening them on both ends with a small leverage hole available in the middle. Take your pliers or fence tool and rotate (circle) around. This pulls the wire tight and your fence is stretched.
Can save you 75% to 90% of your fence maintenance labor. Mend new and old fence wire in a fraction of the normal time. Tighten any kind of wire without unstapling and restretching. A Reel-Tite is a metal disk measuring 4" x 2 3/4" and made of sturdy 14-gauge steel with plated, weather-resistant finish. 4" x 2 3/4". Reel-Tites do not break your wire. Use on any kind of wire: New or old, barbed wire, smooth wire, hi-tensile, woven wire, etc. Just attach Reel-Tite handle and turn clockwise until wire reaches desired tension. An out-turned flange holds securely in place. can be maintained year after year by re-tightening as needed.
This fence stretcher, made of tempered steel, is the last stretcher you'll need to buy. Simple design means no breakdown problems yet effectively tighten wire by putting pressure against the post. Stretcher grabs the wire and you hold pressure with your side, leg, etc, leaving your hands free to staple wire to post. No cumbersome releases to free wire when finished.
Connect your horizontal pipe fence rail to a vertical post or pipe anywhere in your fence line, creating an instant 90 degree angle in your corral or pen. The clamp fastens together with a carriage bolt and nut, providing safe, easy use and a corner that stays put without extra posts, welds or wire wrapping. Fits standard pipe fence from 1-5/8" to 1-7/8".
Quick and simple way to splice wire - barbed, woven, smooth or high tensile. Simply place wire inside splice and crimp using the Crimp 'N Cut Spice-It Tool. Splices stay tight even with temperature changes. Holds tight using only one splice per joint. Package of 100. Crimp 'N Cut Spice-It Tool sold separately.
Speed Brace Fence Brace quickly and easily makes both “H” braces or diagonal braces for permanent or temporary fence. Can be used anywhere you can drive a T-post. Easily slips over T-post, no tools required. Build corner or end braces for all types of livestock fence. Holds up to 5 wires or up to 48" woven wire.
* 4 connectors
* 8 bolts/wing nuts
* 4 wire thimbles
Contents of this package will build 4 light duty end braces, or 2 light duty corner braces, or, 2 heavy duty end braces or 1 heavy duty corner brace.
Fence Wire Stretcher allows for one-man fence fixing. Each end of the stretcher holds a wire while the tool ratchets to pull the two ends together. Needs no other hooks or clips to pull wires. Can hold wires while the Splice-It tool is used to crimp the splices in place to repair or tighten the wire.
Hired hand staple driver is like having an extra pair of hands to make construction and repair of wire fences faster, easier and safer. Just grip the handle and use the wire guide to position the wire on the post. Staples are fed automatically and held into position by the wire. Hit the punch with a hammer to drive the staple in. You get the correct depth every time. For left hand use, reverse the handle and guard. Less effort, less time and no cuts from sharp edges. You'll have a fence that lasts longer thanks to the 1 1/4” barbed staples.
Fence Wire Stretcher with Ratchet allows for one-man fence fixing. Model 405 has holding ratchet to allow for gradual release of wire after tightening. Each end of the stretcher holds a wire while the tool ratchets to pull the two ends together. Needs no other hooks or clips to pull wires. Can hold wires while the Splice-It tool is used to crimp the splices in place to repair or tighten the wire.
Connect your horizontal pipe fence rail to another horizontal pipe rail in your fence line, creating an instant 90 degree angle in your corral or pen. The clamp fastens together with two carriage bolts and nuts, providing safe, easy use and a corner that stays put without extra posts, welds or wire wrapping. Fits standard pipe fence from 1-5/8" to 1-7/8".
Solution for terminating wire fencing to T-Post and post fencing systems. Easy to install and stays in place. Ideal for electric fence repair or construction. Cuts installation time in half and eliminates need for terminal insulator. For smooth and barbed wire.
Large designed for 4-8" posts.
Easily stretch mesh fencing. Stretcher consists of two sides that detach and face each other on either side of fence. Bolt stretcher together to grip fence. Chain is attached to stretcher and used in conjunction with come along to pull fence tight to eliminate fence bulge. Professional looking results. Chains/come alongs are not included.
Solution for terminating wire fencing to T-Post and post fencing systems. Easy to install and stays in place. Ideal for electric fence repair or construction. Cuts installation time in half. All TwistEnds are conductive. For smooth and barbed wire.
Large designed for 4-8" posts.
Unique wire splices require no special tools. For smooth and barbed wire.
1) Pull the fence wire together so that the ends are not more than 1/16” apart. Do not overlap the fence wire. Remove barbs as needed. Note the color mark on the splice.
2) Begin at the color mark and twist the first splice of the set onto the wire. Twist the splice until it snaps securely, holding the wire ends together.
3) Align the second leg of the splice, using the color crossover mark as the center, and begin twisting it into the first leg of the splice.
4) Continue twisting both ends of the splice legs until they are in place and securely holding the fence wire ends.
5) Roll your thumbs over the ends to make sure that all ends of the splice are snapped securely into place.
And that’s it! Your Ranchmate TwistSplice is complete and your repair is strong and durable
Valley Vet Pharmacy successfully completed the rigorous accreditation process by demonstrating the professional operations of the pharmacy, including the maintenance of policies and procedures that protect the veterinarian-client-patient relationship, ensure the appropriate handling of prescription medications, provide appropriate medication information, and ensure quality pharmacy practices are continuously offered to our clients. For more information about the VETERINARY-VERIFIED INTERNET PHARMACY PRACTICE SITES(CM) program, please visit the NABP Web site, www.nabp.net.
By displaying the Vet-VIPPS® Seal, Valley Vet Pharmacy proudly demonstrates to our clients the pharmacy's strong commitment to high quality pharmacy practices and excellence in pharmaceutical care for your pets.
Click the Seal below to verify that our VETERINARY-VERIFIED INTERNET PHARMACY PRACTICE SITES(CM) online veterinary pharmacy services are accredited: