Kool Lube 3

Oster® Professional Products

 

                       COOLANT **** LUBRICANT **** CLEANER

 

Directions:

Kool Lube® 3 is a quick effective lubricant that provides instant cooling, lubrication and cleaning for your clipper blades. Simply spray Kool Lube® 3 through the clipper blades occasionally, during the time you are clipping. The results are reduced friction, heat and less blade wear without a heavy reside of oil. For additional lubrication, apply a thin film of Oster® Blade Lube™ Premium Clipper Oil to the blades before each use.

IMPORTANT: Always test for material compatibility on an inconspicuous area before using.

 

NOTE: Product is not required to be labeled as flammable as described in 16 CFR 1500.3 and 1500.45. PRODUCT CAN BE IGNITED.  Keep away from heat, sparks and flame.

 

WARNING:

Contains Ethanol and Triethylene Glycol. Eye irritant. Avoid contact with eyes. If eye contact occurs, flush with water for 15 minutes. If irritation persists, consult a physician. Avoid prolonged or repeated contact with skin Avoid contamination of food if used on food surfaces, scrub surfaces with a detergent and rinsed with potable water before reusing. Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120º F. KEEP OUT OF REACH OF CHILDREN.

 

CAS NUMBERS:

Ethanol 64-17-5; Isobutane/Propane Blend 75-28-5/74-98-6; Water 7732-18-5; Triethylene Glycol 112-27-6; Isopropyl Alcohol 67-63-0. (Equivalent to 18.4 Fluid Ounces).

 

See Material Safety Data Sheet

Risks: Danger. Extremely flammable aerosol. Container may rupture if subjected to excess heat. Causes skin, eye and respiratory tract irritation. May aggravate existing eye, skin or respiratory tract conditions. Inhalation may cause headache, dizziness, nausea and asphyxiation at high concentrations. May be fatal if large quantities are swallowed.

Precautions:  Avoid breathing vapor. Store in a cool, well ventilated area, away from incompatibles. Keep away from heat, sparks, flam and oxidizing materials. Do not puncture container. Do not inhale vapors or mist. Do not spray into eyes. Avoid prolonged or repeated skin contact. Do not store at temperatures exceeding 48ºC. Wear suitable protective clothing. Use with enough ventilation to keep below TLV. Wash thoroughly after handling. KEEP OUT OF REACH OF CHILDREN.

First Aid: For eye contact, flush with running water for at least 15 minutes. For skin contact, wash with soap and water while removing contaminated clothing. If inhaled, remove victim to fresh air. If breathing stopped, begin artificial respiration. If ingested do not induce vomiting and seek immediate medical attention. For all cases, obtain medical attention if irritation persists.

 

 



Our Terms of Use and Privacy Policy have changed. By continuing to browse this site, you agree to the Terms of Use and Privacy Policy.