Clippers & Blades

About this category

Horse Clippers & Blades

Clipping a horse is half skill and half having equipment that won't quit halfway down your horse's barrel. A solid body clipper, a sharp blade, and something to keep it cool make all the difference, whether you're tidying a winter coat or prepping for the show ring. Valley Vet Supply has been outfitting horse owners since our veterinarian founders opened in Marysville, Kansas, in 1985. This collection carries horse clippers, trimmers, and blade care from Andis, Wahl, and Liveryman, picked for real barn use.

Body Clippers, Trimmers and Blade Care

A full clipping setup usually includes a heavy-duty body clipper, a small trimmer for detail work, and something to keep blades cool and clean. Corded clippers give steady power for long body clips, while cordless models make it easier to work around a horse in the cross ties. The products below cover each of those jobs.

  • ProClip AGC Super 2-Speed Clipper: A heavy-duty Andis clipper that ships with a size 10 UltraEdge blade. Detachable blades, a break-resistant housing, and a maintenance-free motor that runs quiet and cool. Two speeds of 3,400 and 4,400 strokes per minute and a 14 ft cord.
  • KM Supera Cordless 2-Speed Clipper with No. 10 Wide Blade: A balanced, lightweight Wahl clipper with a brushless motor, built for horse and livestock grooming with no cord to trip over.
  • Liveryman Robin Cordless Trimmer: Pocket-sized trimmer for ears and muzzle. Runs 45 minutes at 5,500 SPM, charges by USB in 3 hours, and includes four guide combs.
  • Cool Care Plus: A 15.5 oz Andis spray that cools, disinfects, lubricates, cleans, and prevents rust.

Choosing the Right Clipper Setup

Blade Sizes and Cut Lengths

The higher the blade number, the shorter the cut. A #10 is the standard body blade, and both full-size clippers above ship with one. A #10 leaves roughly 1/16 in of hair, while finer blades like a #30 or #40 are usually saved for show touch-ups on muzzles and ears.

Coat, Temperament and Battery Life

Thick winter coats call for heavy-duty body clippers for horses. If your horse is fussy about noise, start with a quiet trimmer like the Robin. Cordless horse clippers trade some run time for freedom around the cross ties. Finish with Horse Grooming Aids and Horse Shampoos & Conditioners.

Frequently Asked Questions

What blade size should I use to body clip a horse?

A #10 blade is the go-to for most body clips, and both full-size clippers above ship with one. It leaves a short, even finish. Some owners switch to a longer blade on the legs to leave a little more hair for protection.

How often should clipper blades be sharpened or replaced?

Sharpen or swap a blade when it starts pulling hair, leaving tracks, or heating up fast. Cleaning and oiling after every use stretches the time between sharpenings. Send dull blades to a professional sharpener rather than trying it at home, since an uneven edge will pull hair.

How do I keep blades from overheating?

Stop often to check the blade against the back of your hand, and spray a clipper blade coolant like Cool Care Plus as you go. A second blade on hand lets you swap while the first one cools. Brush packed hair out of the blade and keep it oiled, because friction builds heat fast.

!