Insulators

Stand off bracket keeps electric fence approximately 7" away from the existing fence. Intertwine legs of bracket into existing mesh, woven, or barbed wire. Pin Lock holds the wire firmly in place.

Polyethylene insulators for use on vinyl sleeves or wood posts. Locks tight to tape to prevent slipping. Screws not included.

Extends electric fence wire 5” away from wood posts to protect permanent or damaged fences. Nails included.

Fits T-posts from 1 1/4" to 1 3/8". When pin is secured, wire is locked into place and can't slip off insulator.

For use on steel posts without vinyl sleeves.

A durable screw-in insulator for wood posts. For use with the 1/4” electric rope. UV resistant.

Use on wood posts. Has slotted back for easy removal.

Designed for low impedance and standard duty fence controllers. Fits T-Post sizes 1 1/4" to 1 3/8". Wrap around design attaches easily and holds securely. Arcing protection. Easy 45° front end loading feature accommodates most wire sizes and types. U.V. protected to resist weathering.

For use with polytape, polywire, polyrope or traditional wire. Provides maximum protection from sharp jagged T-posts or wood posts.

Holds poly wire rope up to 1/2" diameter or up to 2" wide poly tape. Keeps tape flat, nails included.

A high strength wood post insulator for fences that could suffer greater abuse. Made for stronger materials like twisted or braided rope, Poly Coats and High Tensile wire up to 3/8" diameter. The claw design allows the material to slide upon impact.

The perfect cap for top of T-post when vinyl sleeve is not used, to prevent injury to horses. Accepts tape and wire on same side.

Extends poly tape (up to 1 1/2” wide) 5” away from post to protect permanent or damaged fences. Features an unbreakable snap-on/snap-off fastening system, which accommodates standard sized T-posts from 1 1/4” to 1 3/8”.

Extends poly tape (up to 1 1/2” wide) 5” away from wood posts to protect permanent or damaged fences. Nails included.

Pin lock insulator with nails for wood posts.

Extends electric fence wire 5” away from post to protect permanent or damaged fences. Features an unbreakable snap-on/snap-off fastening system, which accommodates standard sized T-Posts from 1 1/4” to 1 3/8”.

An ideal insulator for corner or end posts. Has a metal shank that extends around the curve of the ring for added strength. Works good for posts with an upward or downward pull.

Fits T-posts from 1 1/4” to 1 3/8”. Accommodates polytape up to 1 1/2” wide.

Flexible 24" long insulators allow maximum line flow around corner posts or trees.

A durable screw-in insulator recommended for rope fences. Rounded edges prevent damage to the rope. Easy wire entry into insulator, but the rope will not come out. Extends the rope 2" away from the post. Smooth design, safe for horses. Black or white. Power Driver slips over the insulator for using a cordless drill. Saves time and labor. Made of galvanized steel.

Unbreakable polycarbonate has 5,000 lb. tensile strength versus 700 lb. for porcelain. The insulator is the same size as a porcelain insulator, but will not chip or crack.

1 1/2" stainless steel screws for Safe-Fence W-16 Insulators.

Use on T-posts for holding Hot Rope, polywire or wire.

Designed for quick and easy installation. For use with heavy gauge wire and barbed wire.

Use on wood or vinyl posts for Hot Rope, polywire or wire.

A high strength T-post insulator for fences that could suffer greater abuse. Made for stronger materials like twisted or braided rope, Poly Coats and High Tensile wire up to 3/8" diameter. The claw design allows the material to slide upon impact.

Slips over XL TuffRing Insulator for use with a cordless drill. Speeds installation time and labor.

Made of high-density polyethylene, these insulators snap onto steel posts or can be nailed to wood posts. Unique design allows wire to be placed onto insulator after insulators are installed simply by placing retaining pin through hole.