Equipment & Tools

Repairing fences can be time consuming and costly. Not anymore! In less than a minute you can tighten your loose fence quickly and inexpensively without cutting the wire. Tightens any type wire up to 12 1/2 gauge without un-stapling and re-stretching. Simply insert the clip and with a couple of turns with tightening handle, your job is done. Will not kink the wire. Can be re-tightened as wire stretches.

There is no faster, more permanent way to take the slack out of your fence line. Works with barbed wire, electric fence wire, horse fencing, or net wire fence. The unique tool is simple in design and easy to use. Durable and comes with a lifetime warranty. Use anywhere along the fence line that needs stretched and the result is a neat, tight wire. No need to remove staples or tie wires. The tool has two “hinges” that are indented; you place the fence to be tightened into those slots, grab another slice of wire tightening them on both ends with a small leverage hole available in the middle. Take your pliers or fence tool and rotate (circle) around. This pulls the wire tight and your fence is stretched.

Can save you 75% to 90% of your fence maintenance labor. Mend new and old fence wire in a fraction of the normal time. Tighten any kind of wire without unstapling and restretching. A Reel-Tite is a metal disk measuring 4" x 2 3/4" and made of sturdy 14-gauge steel with plated, weather-resistant finish. 4" x 2 3/4". Reel-Tites do not break your wire. Use on any kind of wire: New or old, barbed wire, smooth wire, hi-tensile, woven wire, etc. Just attach Reel-Tite handle and turn clockwise until wire reaches desired tension. An out-turned flange holds securely in place. can be maintained year after year by re-tightening as needed.

Use with Jakes Wire Tighteners for tensioning wire.

The standard for both electric and non-electric fences. Class 3 galvanized, 180 KSI wire. Ideal for all perimeter fences. Can be hand-knotted or crimped.

Works like riding on air! The clamp is a pre-formed piece for a 2" round pipe. The 8" tall sturdy metal hub wheel comes with shims for use on gates with less than 1 7/8" O.D. pipe.

High quality plastic construction, measures 46” x 40” with center height at 29 1/2” to fit a 48” opening. Hole provided for securing with a chain. Hinge mounting hardware included. 1-year warranty.

Connect your horizontal pipe fence rail to a vertical post or pipe anywhere in your fence line, creating an instant 90 degree angle in your corral or pen. The clamp fastens together with a carriage bolt and nut, providing safe, easy use and a corner that stays put without extra posts, welds or wire wrapping. Fits standard pipe fence from 1-5/8" to 1-7/8".

Quick and simple way to splice wire - barbed, woven, smooth or high tensile. Simply place wire inside splice and crimp using the Crimp 'N Cut Spice-It Tool. Splices stay tight even with temperature changes. Holds tight using only one splice per joint. Package of 100. Crimp 'N Cut Spice-It Tool sold separately.

For wood and steel posts. Starting and pulling point on one jaw with corrugated hammer head on the other. Front pulls staples, lifts tugs, and splices wire. Wire stretcher located behind the joint.

Model 415 has a new-patented 3rd hook design, which allows for longer pulls without re-setting stretcher. Allows for one-man fence building.

Measures 46” x 40” to fit a 48” opening. Hole provided for securing with chain. Hinge mounting hardware included. 1-year warranty.

Speed Brace Fence Brace quickly and easily makes both “H” braces or diagonal braces for permanent or temporary fence. Can be used anywhere you can drive a T-post. Easily slips over T-post, no tools required. Build corner or end braces for all types of livestock fence. Holds up to 5 wires or up to 48" woven wire. Contents: * 4 connectors * 8 bolts/wing nuts * 4 wire thimbles Contents of this package will build 4 light duty end braces, or 2 light duty corner braces, or, 2 heavy duty end braces or 1 heavy duty corner brace.

This fence stretcher, made of tempered steel, is the last stretcher you'll need to buy. Simple design means no breakdown problems yet effectively tighten wire by putting pressure against the post. Stretcher grabs the wire and you hold pressure with your side, leg, etc, leaving your hands free to staple wire to post. No cumbersome releases to free wire when finished.

Professional quality 22" Splice-It tool has adjustable case hardened steel jaws and sure-grip handles.

To attach rod or pipe fencing to post.

Connect your horizontal pipe fence rail to another horizontal pipe rail in your fence line, creating an instant 90 degree angle in your corral or pen. The clamp fastens together with two carriage bolts and nuts, providing safe, easy use and a corner that stays put without extra posts, welds or wire wrapping. Fits standard pipe fence from 1-5/8" to 1-7/8".

Made of hardened steel with rust-resistant finish and ergonomic handles with black insulated grips.

Removes steel T-Post without the aid of chains, jacks or motorized assistance. No back-breaking wiggling or pulling. Use in remote areas. The simple design is built to last.

Turn clockwise until wire reaches desired tension.

Forged fence tool is heavy duty, with vinyl grip. Suitable for many jobs, including stretching and twisting wires, as a hammer, nail puller, spade, and as a wire cutting plier.

Insert barbwire, smooth wire, or small cable into slot of self-locking collar and stretch with a come-along or fence stretcher. Will not damage wire.

TwistSplices for 12.5 ga smooth wire are very quick and handy to tie off hi-tensile wire. Unique wire splices require no special tools. For smooth and barbed wire. 1) Pull the fence wire together so that the ends are not more than 1/16” apart. Do not overlap the fence wire. Remove barbs as needed. Note the color mark on the splice. 2) Begin at the color mark and twist the first splice of the set onto the wire. Twist the splice until it snaps securely, holding the wire ends together. 3) Align the second leg of the splice, using the color crossover mark as the center, and begin twisting it into the first leg of the splice. 4) Continue twisting both ends of the splice legs until they are in place and securely holding the fence wire ends. 5) Roll your thumbs over the ends to make sure that all ends of the splice are snapped securely into place. And that’s it! Your Ranchmate TwistSplice is complete and your repair is strong and durable

Barbed staples for use with a staple driver.

Solution for terminating wire fencing to T-Post and post fencing systems. Easy to install and stays in place. Ideal for electric fence repair or construction. Cuts installation time in half and eliminates need for terminal insulator. For smooth and barbed wire. Large designed for 4-8" posts.

Replacement batter for the S100 charger.

SLA0905 Replacement 6v Battery for use with solar energizers.

Easily stretch mesh fencing. Stretcher consists of two sides that detach and face each other on either side of fence. Bolt stretcher together to grip fence. Chain is attached to stretcher and used in conjunction with come along to pull fence tight to eliminate fence bulge. Professional looking results. Chains/come alongs are not included.

6-Volt, 12 amp replacement battery for the S40 charger.

Solution for terminating wire fencing to T-Post and post fencing systems. Easy to install and stays in place. Ideal for electric fence repair or construction. Cuts installation time in half. All TwistEnds are conductive. For smooth and barbed wire. Large designed for 4-8" posts.