Trail

The Trail Blazer saddle is not just for the trail. Its sleek design and high quality construction make it the ultimate utility saddle. Great for everyday exercising, colt-starting, reining and western pleasure disciplines. Built on an AXIS tree, which is designed to allow your horse to move and perform as nature intended. Bars are designed to provide full and even contact to the horse’s back while the tips flare up and away from the horse’s shoulder, eliminating any interference of natural movement. Swell width: 12 1/2”. Gullet width: 6 1/2” on regular, 7” on wide. Cantle height: 4”. Horn: 3” neck, 2 1/4” cap. Approximately 27 lbs.

The Montreal Royal Trooper is the finest field trail saddle made. Equi-Balanced medium tree provides a narrower ride and better fit for your horse. Unique seat suspension allows for easy adjustment to raise or lower your seat for maximum comfort and support. The patented Gel-Cush seat will keep you comfortable mile after mile. Durable solid brass gullet, round skirt, and western rigging. Free-moving fenders allow for relief in knees and ankles while promoting balanced riding. Oversized, military hooded ErgoBalance stirrups. Includes billets and tie straps. Solid brass hardware. Skirt: 24". Approximate weight 28 lbs.

The Round Rock Trail Saddle by High Horse Saddles has a Gaited Easy-Fit tree, which is built to be an easy and comfortable fit for your horse. The tree bars flex, independently of the swell and cantle, down the length of the tree. This allows for freedom of movement in the horse and more comfort for the rider. Also has adjustable position in-skirt rigging. Swell: 13”. Gullet width: 6 ½”. Cantle Height: 4”. Horn: 3” neck, 2 ¼” cap. Skirt: 9” D x 25” L. Approximately 28 lbs.

All-leather trail saddle made with tunnel skirt ventilation, glove leather skirt liner, close-cut components, a high-back cantle, and padded horse bars. Tree: Ralide tree with 5 year warranty. Gullet width: 7". Cantle: 5". Horn: Pleasure, 3". In-skirt dropped C-plate rigging. Rear-rigged for center-fire option. Cinch, off billets, and tie straps included. Dark hand-oiled finish. Approximately 22 lbs.

The perfect combination of a soft shock-absorbing bareback pad with the added comfort of a form-fitted seat. The seat features a high rise cantle for added support. Has an adjustable grab handle, removable stirrups and stainless steel hardware. Very light weight and versatile to many different sizes and breeds. The closed cell foam allows for a close contact ride with no painful pressure points for rider or horse. Hose off and air dry. Girth/cinch strap not included.

Classic look, new technology feel. The Sheridan Trail Saddle by Circle Y Saddles is made with Flex2 technology, has a dropped front rigging and round skirt with an angled rear dee that enables the use of balanced ride rigging options. Tooled Old West Border with gunmetal silver conchos. Swell: 13”. Gullet: 6 3/4” on semi, 7¼” on full. Cantle height: 4”. Horn: 3 3/4” neck, 1 7/8” cap. Skirt: 10”D x 25”L. Approximate weight 25 lbs.

The Pioneer Flex 2 Trail Saddle by Circle Y Saddles is a beautiful, hand tooled leather saddle that is ready for those all day trail rides. Flex 2 technology provides comfort for both the horse and rider. The seat has impact foam padding, giving a little more cush for your tush. The Ergobalance™ stirrup design positions the rider’s feet and legs for decreased knee and ankle fatigue while promoting balanced riding. Close contact skirt design. Clip and Dees at conchos. Swell: 13”. Gullet width: 6 ¾”. Cantle height: 4”. Horn: 3 ¼” neck, 1 7/8” cap. Skirt: 15” D x 26” L. Approximate weight: 25 lbs.

Control, communication and comfort are the main points of focus in the Julie Goodnight line of Peak Performance saddles. The Wind River Trail saddle is built on a Flex 2 tree technology with 3-way in-skirt rigging. Also has a Slip-Not skirt liner with gel bar pad for horse’s comfort, while the neo-shock skirt absorbs shock through neoprene filler and conforms to horse’s back for comfort.

Uncompromising comfort with the convenience of no horn, the perfect design for a trail rider. Navigate rough terrain without worry your saddle will slip, simply engage the optional angled rear dee to conveniently secure the saddle. Confidently ride the extra miles knowing your horse is experiencing the same unparalleled comfort because of the advanced tree system. Tender areas are protected with the ergonomic, shock-absorbing seat. Swell width: 10”. Cantle height: 3 1/2”. Skirt: 26” round. Approximate weight: 28 lbs.

No more sore joints from being in the saddle all day. Based on Tucker’s High Plains saddle, the Horizon North Star has the same wide swells and deep, 5” cantle to keep you secure and supported in the saddle. The saddle is made of truly exceptional English bridle leather, known for its luxurious softness and its natural resistance to moisture and the elements. Swell width: 14 1/2”. Cantle height: 5”. Horn: 2 1/2”. Skirt: 26” full. Approximate weight: 35 lbs.

Don’t shy away from your next long trail ride. Enjoy it with the Horizon Trail Head saddle! The lower horn and cantle provide a more open seat and easier mounting and dismounting. Made with English bridle leather. Built on an ergonomic, shock-absorbing seat along with a silicon matrix that is paired with the gel-cush seat to provide a more comfortable ride while eliminating pressure points in tender areas. Swell width: 14 1/2”. Cantle height: 4”. Horn: 2 ”. Skirt: 26” full. Approximate weight: 35 lbs.

Built specifically for a mule’s unique conformation with a mule fit tree available in medium or wide. Reinforced crupper dee with extra dees for securing breeching or other gear. A-fork swell for room up front with 5” cantle for support. Adjustable position in-skirt rigging. Swell: 9”. Cantle height: 5”. Skirt length: 26”. Horn: 3”. Your choice of brass or chrome hardware, tooled or smooth leather, enduro-balance single tie or double tie rigging, western or trail fenders. Semi-round skirt. Approximately 28 lbs.

Floral tooling design saddle with stainless steel conchos, six sets of strings, and a crupper dee. Features a Ralide tree that is durable and lightweight. Leg cut skirts for close contact and precise cueing. Grain out double padded seat for all-day comfort. Softee fenders are lined with soft, oil-tanned leather so they feel broke-in right from the start, and they are pre-turned for additional comfort. Swell width: 12”. Gullet width: 6 1/2”. Cantle height: 4” regular, 5” wide. Horn: 3 1/4” Neck, 2 1/4” Cap. Skirt: 13” D x 25” L. Weight: 30 lbs.

Affordable, well-built, made-to-last are just a few of the features that describe the High Horse Trail Saddle. Made with a Ralide tree (5 year guarantee) and in-skirt C-Rigging. Fully floral tooled, grain-out leather seat, silver-plated conchos, clip and dees front and rear. Swell 12”. Gullet Width 6 1/2”. Cantle Height 4”. Horn 3 1/4” neck with 1 7/8” cap. Skirt Length 26 1/2”. Approximate weight 30 lbs.

Hand-tooled barbwire design saddle with stainless steel conchos, six sets of strings, and a crupper dee. Features a Ralide tree that is durable and lightweight. Leg cut skirts for close contact and precise cueing. Grain out double padded seat for all-day comfort. Softee fenders are lined with soft, oil-tanned leather so they feel broke-in right from the start, and they are pre-turned for additional comfort. Swell width: 12”. Gullet width: 6 1/2”. Cantle height: 4” regular, 5” wide. Horn: 3 1/4” Neck, 2 1/4” Cap. Skirt: 12 1/2” D x 26” L. Weight: 30 lbs.

The Big Springs trail saddle by High Horse Saddles is built on a wood tree. Smooth leather finish, grainout black seat, brass ring hardware and felt skirt lining. Trail stirrups on western fenders. Also has an adjustable position inskirt rigging with rear dee and crupper ring. Swell width: 12”. Gullet width: 6 ½”. Cantle height: 5”. Horn: 3 ¼” neck, 1 7/8” cap. Skirt: 13 ½” D x 23” L. Approximate weight: 29 lbs.

The Mesquite Trail Saddle takes a minimalist approach with a pared down skirt style and light weight stirrup leathers. Antique rope edge conchos and floral tooling lend a traditional western look. Swell width: 12”. Gullet width: 6 1/2”. Cantle height: 4” regular, 5” wide. Horn: 3 1/4”. Cap height: 2 1/4”. Skirt: 11” D x 25” L. Approximate weight: 29 lbs.

Copper flower conchos for a western look. Cordura skirt and fenders. Stainless steel hardware, hand-tooled border design. Swell width: 12”. Gullet width: 6 ½”. Cantle height: 4” regular, 5” wide. Horn: 3 1/4” Neck, 2 1/4” Cap. Skirt: 12 1/2” D x 26” L. Weight: 22 lbs.

The 6910 Lockhart Easy-Fit Cordura Trail saddle has a slightly flexible ralide tree, allowing your horse freedom of movement while still being supportive of your weight. Has adjustable position rigging for ultimate comfort for your horse, plus a double padded seat for your all day comfort, too. Stainless steel hardware. Swell with: 12”. Gullet width: 6 1/2”. Horn: 3 1/4” neck, 1 7/8” cap. Skirt: 12 1/2” d x 26” l. Approximately 21 lbs.

Unique hand-tooled border with copper flower conchos. Angled rear dee secures the saddle when traveling over rough terrain. Cordura skirt and fenders. Black grain out double padded seat for all-day comfort. Swell width: 12”. Gullet width: 6 1/2”. Cantle height: 4” regular, 5” wide. Horn: 3 1/4” Neck, 2 1/4” Cap. Skirt: 10” D x 25” L. Weight: 21 lbs.

The Eldorado Easy-Fit Saddle by High Horse Saddles is made with the ladies in mind. This lightweight saddle features a Cordura skirt and fenders for easier agility. The Ralide flexible tree allows your horse freedom of movement while the adjustable position rigging gives the perfect fit. The all leather swell and cantle has a smooth finish. Features a fleece lined skirt, padded seat and ralide trail stirrups. Swell width: 12”. Gullet width: 6 ½”. Cantle height: 4” regular, 5” wide. Horn: 3 ¼” neck, 1 7/8” cap. Skirt: 10” D x 25” L. Approximately 23 lbs.

The 6970 El Campo Easy-fit Gaited Cordura Trail Saddle is designed specifically with a gaited horse in mind with a short skirt and adjustable position rigging. Rear angled dee is used when traveling over rough terrain. Cordura skirts and fenders for less weight on the horse’s back. Easy care fleece underneath. Swell width: 13”. Cantle height: 4”. Horn: 3” neck, 2 1/4” cap. Skirt: 9” D X 25” L. Approximately 23 lbs.

The Alabama Trail Gaiter by Circle Y Saddles is designed with a shorter skirt and a deeper pocket to move your weight off your horse’s shoulders. The rigging is positioned back so the pull is not on the shoulders; the fenders are free swinging and “S” shaped to allow for proper seat and leg positioning. Flex2 technology, impact foam seat padding, Ergo Balance Trail stirrups, angled rear rigging dee, clip and dees front and rear, and a crupper dee complete this beautiful trail saddle. Swell: 13”, Cantle height: 4”, Skirt length: 25” L. Approximately 24 lbs.

The Cashel Lite is conveniently lightweight at only 20.5 lbs. and made to provide the security and comfort you need for long rides on the trail. The roughout seat has extra cushion for added comfort. Roughout fenders and jockey. Quality fiberglass encased tree, cotton-poly blend lining, and lightweight aluminum stirrups for the best possible ride. Gullet width 6.5", Cantle height: 3.5", Horn: 2" with 2" cap. Includes a 2” breast collar.

All-leather trail saddle made with tunnel skirt ventilation, glove leather skirt liner, close-cut components, a high-back cantle, and padded horse bars. Tree: Ralide tree with 5 year warranty. Gullet width: 7". Cantle: 5". Horn: Pleasure, 3". In-skirt dropped C-plate rigging. Rear-rigged for center-fire option. Cinch, off billets, and tie straps included. Dark hand-oiled finish. Approximately 22 lbs.

Wood Tree Trail designed with a unique tree for foundation-style horses that need a wider fit from the shoulder to the loin. This saddle features a traditional double skirt with a low-profile horn.

The Original Flex2 Saddle is an all-time favorite for riders across the country. Flex2 bar frees up shoulder and hip movement for maximum performance from your horse. A 4” tall cantle and 13” wide swell provides a moderate seat, standard in all-day comfort.

The appeal of a traditional Wade look meets Flex 2 features, providing riders with all-day comfort for long rides but is still light weight. 10” Wide Wade Swells with Wade Horn and 5” Cantle.

Entry level hybrid saddle. Offers top-quality features such as a double-padded seat for all-day comfort, clip and dees at the front and rear conchos, crupper dee, and adjustable position rigging for several fit options. The leather/Cordura combination significantly reduces the overall weight of the saddle.

An ideal, all-leather saddle for those just starting their riding career. Offers many similar features as other trail saddles, such as a double-padded seat for all-day comfort. Features clip and dees at the front and rear conchos, crupper dee, and adjustable position rigging for several fit options.

For a more balanced position in the saddle, look to this exclusive design, developed and ridden by Julie Goodnight. With a correct seat, close-contact feel, and narrow twist, these saddles provide absolute comfort for both horse and rider.

Offering all the features of the Flex2 bar system with slight adjustments for fit. If your gaited horse has the traditional narrow body, this saddle is the saddle of choice. Designed to set you deep in the pocket, feet forward and riggings back, to free up the shoulder of your gaited horse.

The perfect saddle for riders looking for the ultimate, close-contact feel of their horse. Also an ideal option for horses that are difficult to fit with a traditional saddle. Light weight and provides a close-contact and secure feeling for the rider.

The perfect saddle for riders looking for the ultimate, close-contact feel of their horse. Also an ideal option for horses that are difficult to fit with a traditional saddle. Light weight and provides a close-contact and secure feeling for the rider.

The Big Springs trail saddle by High Horse Saddles is built on a wood tree. Smooth leather finish, grainout black seat, brass ring hardware, and felt skirt lining. Trail stirrups on western fenders. Also has an adjustable position in-skirt rigging with rear dee and crupper ring. Swell width: 12”. Gullet width: 6 1/2”. Cantle height: 5”. Horn: 3 1/4” neck, 1 7/8” cap. Skirt: 13 1/2” D x 23” L. Approximate weight: 29 lbs.

Looking for one universal saddle to have in your barn? This is it! Balance-ride All-Around Trail Saddle. Gullet: 7". Cantle height: 3 1/2". Horn: Roper, 3 1/2". Extra padded seat, roughout. Comes with 3-piece riding set: cinch, off billet, and tie strap.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The classic River Plantation is a popular choice for riders who like a narrow twist and deep seat pocket in the seat. It’s a great choice for a gaited horse or a trotting breed. Enjoy the freedom of no horn in all the miles you travel. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Smooth finish for easy care. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, plantation fenders, and Trail Glide EBS stirrups. Includes nylon tie straps and saddle strings. Skirt: Round, felt-lined. Brass hardware. Approximate weight 23 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The perfect combination of wider swells with the deep 5” cantle for back support helps keep you in position. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Smooth finish for easy care. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, medium western fenders, and leather-laced EBS 2.5" stirrups. Includes saddle strings. Skirt: Full, felt-lined. Brass hardware. Approximate weight 25 lbs.

A great choice for your trail outings. Features the Flex 2 system, a revolutionary dual bar system that provides stability for the rider and flexing for the horse’s back, an impact seat, neo-shock absorbing skirt, ready-to-ride jockey and fenders, and ergo-balance stirrups. Swell width: 10”. Cantle height: 5”. Horn: 3 1/2” Neck, 2 1/4” Cap. Skirt: 12” D x 26” L. Weight: 30 lbs.

This trail saddle features a fiberglass reinforced wood tree, making it perfect for the All-Around Trail rider. The tree allows for dragging, roping, or ponying. Close contact single skirt decreases extra weight and bulk and keeps you close for precise cueing. Tunnel skirt eliminates pressure on the horse’s spine. Impact foam seat for all-day riding comfort. 3-way rigging, and pre-shaped fenders to reduce joint fatigue. Swell width: 13”. Cantle height: 4”. Horn: 3 1/2” Neck, 2 1/2” Cap. Skirt: 14” D x 27 1/2” L. Weight: 33 lbs.

The Topeka Flex 2 Trail Saddle by Circle Y Saddles is a stylish, border-tooled, all-leather trail saddle that features a Bay Apache seat. Tree: Flex Lite with 3-way in-skirt riggings. Tie strap and off billet. Swell width: 13". Gullet width: 6 3/4" (semi bar tree) or 7 1/4" (full bar or wide tree). Cantle height: 4". Horn: 3 1/4" neck, 1 7/8" cap. Skirt: 27 1/4" L x 13 1/2" D. Approximate weight: 22 lbs.

The tree is a Ralide 13” roper front, with full-quarter horse bars. Double rigged with roughout seat. Gullet width: 6 3/4”. Cantle height: 4”. Horn: 3 1/2” Roper. Approximately 22 lbs. Includes cinch, off billet, and tie straps.

Looking for one universal saddle to have in your barn? This is it! Balance-ride All-Around Trail Saddle. Gullet: 7". Cantle height: 3 1/2". Horn: Roper, 3 1/2". Extra padded seat, roughout. Comes with 3-piece riding set: cinch, off billet, and tie strap.

The Flex-Lite Iron Tunnel Trail Saddle by Circle Y Saddles reduces ankle and back strain due to the flexible design in the tree. Flex-Lite tree features 3-way in-skirt rigging. Includes tie strap and off billet. Swell: 13". Gullet width: 6 3/4". Cantle height: 4". Horn: 3 1/4" neck, with 1 7/8" cap. Skirt: 13 1/2" D x 27 1/4" L. Approximate weight: 25 lbs.

Harkening to traditional craftsmanship and now with a contemporary look, the Julie Goodnight Wind River saddle is the ideal choice for both trail and performance riders. With turquoise accents and a stunningly custom design featuring Snowflake and Oak Leaf-combo tooling, this saddle is sure to garner admiration from all. Enjoy the trusted quality from the traditional Julie Goodnight saddle, now exclusively available with show-stopping details for Valley Vet Supply customers.

Lightweight draft cordura saddle. EquiFit fiberglass tree, ‘Wide-Gullet’ draft horse bars. Gullet: 7 1/2”. Cantle height: 4”. Pleasure horn. Suede leather, extra padded roughout seat. Fully double rigged. Approximately 22 lbs.

Nice, lightweight cordura nylon saddle for the all-day trail rider. Gullet: 6 3/4”. Cantle height : 4”. Extra padded roughout seat. 17” only. Approximately 22 lbs. Includes cinch, off billet, and tie strap.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The classic River Plantation is a popular choice for riders who like a narrow twist and deep seat pocket in the seat. It’s a great choice for a gaited horse or a trotting breed. Enjoy the freedom of no horn in all the miles you travel. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Smooth finish for easy care. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, plantation fenders, and Trail Glide EBS stirrups. Includes nylon tie straps and saddle strings. Skirt: Round, felt-lined. Brass hardware. Approximate weight 23 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The classic River Plantation is a popular choice for riders who like a narrow twist and deep seat pocket in the seat. It’s a great choice for a gaited horse or a trotting breed. Enjoy the freedom of no horn in all the miles you travel. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Classy tooled border design. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, plantation fenders, and Trail Glide EBS stirrups. Includes nylon tie straps and saddle strings. Skirt: Round, felt-lined. Brass hardware. Approximate weight 23 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The Equitation style provides the rider a balanced position in the seat. Stirrups are hung from English style stirrup bars placed for easy posting. Padded flaps feature strategically positioned knee rolls. A great saddle for the English crossover rider or riders who want plenty of leg freedom and a correct seat. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. English billet rigging, English stirrup leathers, and Trail Glide EBS stirrups. Skirt: Round, felt-lined. Brass hardware. Approximate weight 21 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The no-horn design is great for bending under low branches on the trail, while still providing rider security in the seat. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Smooth finish for easy care. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, medium trail fenders, and Trail Glide EBS stirrups. Double breast collar dees for proper breast collar placement. Includes nylon tie straps and saddle strings. Skirt: Round, felt-lined. Brass hardware. Approximate weight 24 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The no-horn design is great for bending under low branches on the trail, while still providing rider security in the seat. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Classy tooled border design. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, medium trail fenders, and Trail Glide EBS stirrups. Double breast collar dees for proper breast collar placement. Includes nylon tie straps and saddle strings. Skirt: Round, felt-lined. Brass hardware. Approximate weight 24 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The perfect combination of wider swells with the deep 5” cantle for back support helps keep you in position. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Improved engineering has allowed for a lighter weight saddle. Smooth finish for easy care. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, medium western fenders, and leather-laced EBS 2.5" stirrups. Skirt: Full, felt-lined. Brass hardware. Approximate weight 25 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Upgraded Tucker logo hardware incorporates rings for tying gear. The perfect combination of wider swells with the deep 5” cantle for back support helps keep you in position. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Improved engineering has allowed for a lighter weight saddle. Classy tooled border and floral design. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, medium western fenders, and leather-laced EBS 2.5" stirrups. Includes saddle strings. Skirt: Full, felt-lined. Brass hardware. Approximate weight 25 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. Has a low 2" horn and 3 1/2" cantle to provide a more open seat and for easier mounting and dismounting. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Smooth finish for easy care. Built on a fiberglass-reinforced DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, medium western fenders, and leather-laced EBS 2.5" stirrups. Includes saddle strings. Skirt: Full, felt-lined. Brass hardware. Approximate weight 24 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. Has a low 2" horn and 3 1/2" cantle to provide a more open seat and for easier mounting and dismounting. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Classy tooled border design. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt western rigging, medium western fenders, and leather-laced EBS 2.5" stirrups. Skirt: Full, felt-lined. Brass hardware. Approximate weight 24 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Smooth finish for easy care. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt adjustable rigging, medium western fenders, and tooled, leather covered EBS stirrups. Double breast collar dees for proper breast collar placement. Includes nylon tie straps and saddle strings. Skirt: Full, felt-lined. Chrome hardware. Approximate weight 24 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Floral tooling. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt adjustable rigging, medium western fenders, and tooled, leather covered EBS stirrups. Double breast collar dees for proper breast collar placement. Includes nylon tie straps and saddle strings. Skirt: Full, felt-lined. Chrome hardware. Approximate weight 24 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The Big Bend Trail is designed for the larger rider. A 2” wider seat pocket combined with a flatter seat rise gives the rider a more generous seat. Full stirrup leathers allow plenty of rider support. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Smooth finish for easy care. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt adjustable rigging, medium western fenders, and leather-laced EBS 2.5" stirrups. Skirt: Full, felt-lined. Chrome hardware. Approximate weight 25 lbs.

The revised Classics line has the same great look and function you know and expect from Tucker, with a revitalized design. Improved engineering has allowed for a lighter weight saddle. Upgraded Tucker logo hardware incorporates rings for tying gear. The Big Bend Trail is designed for the larger rider. A 2” wider seat pocket combined with a flatter seat rise gives the rider a more generous seat. Full stirrup leathers allow plenty of rider support. The Gel Cush shock-absorbing seat has been “trail tested” and approved for ultimate trail comfort. Classy tooled border design. Built on a fiberglass-reinforced, DURAhide-covered medium wood tree for strength and light weight. In-skirt adjustable rigging, medium western fenders, and leather-laced EBS 2.5" stirrups. Includes nylon tie straps and saddle strings. Skirt: Full, felt-lined. Chrome hardware. Approximate weight 25 lbs.

For those needing a little more room in the seat, The Big ‘Un is a nylon corurda 19” seat with extra padding and roughout. The tree is a steel EquiFit wood/fiberglass tree, on a 13” barrel front and full-quarter horse bars. Gullet: 6 3/4:” Cantle height: 4”. Horn: 3 3/4”. 7/8 position rigging. Approximately 22 lbs. Includes cinch, off billet, and tie strap.

The Topeka Flex 2 Saddle by Circle Y Saddles is a stylish, border-tooled, all-leather trail saddle that features a Bay Apache seat. Tree: Flex Lite with 3-way in-skirt riggings. Tie strap and off billet. Swell width: 13". Gullet width: 6 3/4" (semi bar tree) or 7 1/4" (full bar or wide tree). Cantle height: 4". Horn: 3 1/4" neck, 1 7/8" cap. Skirt: 27 1/4" L x 13 1/2" D. Approximate weight: 28 lbs.

Light on weight, heavy on quality. Soft, supple leather and a streamlined design make this the ultimate trail saddle. Double padded seat for advanced rider comfort on a round skirt. Built on an AXIS tree, which is designed to allow your horse to move and perform as nature intended. Bars are designed to provide full and even contact to the horse’s back while the tips flare up and away from the horse’s shoulder, eliminating any interference of natural movement. Swell width: 12.5”. Gullet width: 6 1/2” on regular, 7” on wide. Cantle height: 4”. Horn: 3” neck, 2 1/4” cap. Approximately 25 lbs.

Sharp looking and priced right, this Duraleather, full quarter horse bar trail saddle is the perfect answer to your weekend ride. Stainless steel hardware, equi-suede padded and stitched seat, and stainless steel stamped conchos add to the beauty of this saddle. EZ Fold Fender System allows the rider to easily self-shape the fenders. Cinch sold separately. Swell width: 12 1/2”. Gullet width: 6 3/4”. Cantle height: 3 1/2”. Horn: 3”. Skirt: 28”L. Approx weight: 21 lbs.