These metal hay baskets make for easy feeding of hay. Great for shows or small pens. Stackable and lightweight for easy hauling and storage. Front panel meaures 19" tall x 16" wide and back panel is 20" tall x 18" wide with a 12 1/4" deep opening.
Powder coated steel feeder that conveniently holds both hay and grain. This combination feeder is great for kidding season or the show circuit. Sturdy clips on back allow for easy hanging on panels. 21" tall x 21" wide x 14" deep.
This hanging hay goat feeder has side brackets that allow hanging on panels or attachment to walls. 4x4 paneling on front and sides to allow hay to be pulled through with minimal wasting. Lightweight and easy to handle.
This sturdy steel hay feeder has 4 x 4 paneling at sides and ends of feeder to allow easy hay feeding with minimal waste. Easily holds one square bale. Available with pan to catch any loose hay. Pan is angled on sides to help eliminate standing in pan. 4' tall x 28" wide x 4' long x 30" deep.
The Classic 2-in-1 Feeder is designed for goats, sheep, and calves. Hangs easily on fence rail, chain-link, or hurricane fencing. Unique hook-over design for convenient mounting, permanently or temporarily at shows. Combination 2-in-1 feeder holds grain and two flakes of hay. Galvanized steel. 21.5"L x 13 "W x 23"H.
Ideal for goats, sheep, and miniature horses. Its dual-purpose molded bracket functions as both a hanging bracket and a carrying handle. The bracket fits easily over any 2” wide board to create a sturdy feed pail in the stall, on a fence or anywhere else, plus its smaller size and finger grip bottom make it perfect for scooping and pouring. For more permanent mountings, simply place two screws in the holes provided on the handle.
Ideal for foals and other small animals. Built-in bracket hooks over any 2-by-wide board for portable use in barn, stall, pasture, or pen. Two eyelets provided for permanent mounting with screws (not included) if desired. Made of tough, DuraFlex plastic. Measures 9.75 inch long by 11 inch wide by 5.5 inch high, holds 6 quarts (1.5 gallons).
Large capacity 22 quart feed pan is ideal for holding large volume, high fiber feed rations. The large, open handle design provides a comfortable. Large diameter bottom prevents tipping and spills. 22 quart feed pan is constructed of tough impact resistant polyethylene.
Has 7" spacings between the vertical uprights with 1/2" shafts that support the tub. The tub height is 16" above the ground. Easy to clean and designed to reduce feed loss. Unit comes in 3 steel sections that pin together.
A sturdy polyethylene feeder made to dispense minerals to your goats and sheep automatically with no waste or danger of contamination. This non-corrosive, rustproof feeder is designed to protect the minerals from the elements and keep it clean. Has an adjustable height and flow control. It fills from the top and has an attached lid. Holds up to 25 lbs.
This Little Giant fence feeder is ideal for field, pasture, trailer or stall. The durable molded bracket hooks over any 2” wide board to instantly deliver a sturdy feed bucket. For a more permanent installation, simply set two screws in the holes provided. The molded bracket also has a built in handle for easy maneuvering. Made of polyethylene.
The 24" Hook Over Feeder is made from tough polyethylene and has 16 quart capacity. Built-in divider allows for simultaneous feeding or separating of pellets, feed and supplements. Heavy duty steel brackets allow the feeder to hang on wire, pipe and board fences. Brackets adjust from 1/4" to 2 1/4".
The Hook Over 9 Quart Goat Trough is ideal for goats, sheep, llamas, and alpacas. When feeding multiple animals together, the narrow design and metal grid help minimize pushing and fighting. Made of tough, impact-resistant polyethylene. 9-Quart Hook Over Trough mounts on any 2" wide board or on wire livestock panels. 37.75"L x 8.44"W x 4.72"H.
Heavy-duty 8' bunk feeder has a galvanized pan adjustable from 11 1/2" to 17 1/2" high and an adjustable top bar. The V- trough design keeps kids/lambs from standing in feeder. Has a sturdy steel base. Best for dispensing grain.
Valley Vet Pharmacy successfully completed the rigorous accreditation process by demonstrating the professional operations of the pharmacy, including the maintenance of policies and procedures that protect the veterinarian-client-patient relationship, ensure the appropriate handling of prescription medications, provide appropriate medication information, and ensure quality pharmacy practices are continuously offered to our clients. For more information about the VETERINARY-VERIFIED INTERNET PHARMACY PRACTICE SITES(CM) program, please visit the NABP Web site, www.nabp.net.
By displaying the Vet-VIPPS® Seal, Valley Vet Pharmacy proudly demonstrates to our clients the pharmacy's strong commitment to high quality pharmacy practices and excellence in pharmaceutical care for your pets.
Click the Seal below to verify that our VETERINARY-VERIFIED INTERNET PHARMACY PRACTICE SITES(CM) online veterinary pharmacy services are accredited: